Genie GR26J

Specification

Make

Genie

Model

GR26J

Working Height

9.85m / 32ft 4in

Platform Height

7.9m / 26ft

Maximum Outreach

3.15m / 10ft 5in

Min Weight

2,650.00kg / 5,857lbs

Safe Working Load

200.00kg / 442lbs

Machine Length

2.82m / 9ft 4in

Machine Width

0.99m / 3ft 3in

Machine Height

1.99m / 6ft 7in

Power Options

Electric/Battery

Turning Radius

0.59m / 2ft

Gradeability

25%

Cage Rotation

140 degrees

Interested in hiring a Genie GR26J?

ENQUIRE

0800 865 4455

Download Specification

Overview Key Features Accessories Ideal Applications Resources

Genie GR26J Mast Boom

The Genie GR26J is a versatile, two-person machine which is well suited for increasing productivity in congested industrial areas, corridors and hallways with a width of only 0.99m.

This machine comes equipped with a rotating jib that provides an “up-and-over” maximum clearance of 6.7m, ideal for building and factory maintenance. The low weight of the Genie GR26J (2650kg) enables the machine to work on weight restricted areas and upper floor levels.

Key Features of the Genie GR26J

Hydraulic turntable rotation
Fully proportional lift and drive system
Drivable at full height
Low 0.15m platform entry height
Maintenance free rigid steel hydraulic mast
99cm compact width
Low unit height of 1.99m
Low weight
Onboard diagnostic system
Direct electric rear wheel drive with electric parking brake
Front wheel steering
Brake release switch
Reinforced ABS chassis covers
Tie down attachments points
Overhead crane attachment points
Drive enable system
Horn
Tilt level sensor with audible alarm
Platform overload sensing
Manual platform lowering valve
Emergency stop at both platform and ground controls
Certified load sensor

Recommended training course for this platform: IPAF Category: Mobile Boom (3b)

Available to hire, lease or buy from Hire Safe Solutions in the UK and ROI.

Call us on 0800 865 4455 for more information

Or, fill out an enquiry form here and we will get back to you as soon as possible.

Looking for something else?

Discover our entire range of Mast Boom Lifts here.

The Genie GR26J can be fitted-out with an assortment of accessories to increase productivity and safety on site.

Boom Lift Pipe Racks
To help make transporting pipes and conduits easier for electricians, plumbers and maintenance workers, these boom pipe racks fit securely to the basket's handrails and have been designed to be as unobtrusive as possible, optimising the platform's work space.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Ground Guards
Our tough, durable ground guards offer a safe solution when working on soft or sensitive ground. They are strongly recommended when manoeuvring over grass to prevent the MEWP from sinking and becoming stuck.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Harness
Our safety harness and lanyards provide the operator with the necessary fall protection needed when operating any boom lift (Categories 1b and 3b). They are available to purchase and come with a handy carry bag to store your harness in.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@dev.hiresafesolutions.com
Telematics
Telematics can be added to your machine and act as an additional layer of security. Not only do they provide real-time monitoring, but they also help to prevent unauthorised use, limiting access to either IPAF-trained personnel only; or specific individuals with a unique pin code. Geo-Fencing can also be setup, further strengthening site security by ensuring the machine can only be operated in a pre-defined area.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Tool Tethers
When working with powered access, there is a risk of dropping tools out of the platform, which if working high enough, could prove fatal. Tool tethers offer a safe and effective way of preventing this and can be easily secured to a wristband, harness or fixed anchoring point on the platform.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Transformer & Lead
It's essential to fully charge all electric equipment each night in order to get the most out of them and prolong the lifespan of the batteries. Charging facilities on site can often be limited and 110V power may not even be an option. In these cases, our 110V transformers can be used to lower the 240V voltage coming from a standard UK plug socket down to the 110V that is required to safely charge the electric equipment. These can be supplied in 3.3kVA or 5kVA models depending on the type of machine being charged.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com

The Genie GR26J comes equipped with various features designed to enhance your efficiency and performance on the job.

Electric Powered
This machine is completely electric-powered, perfect for working indoors and in sensitive environments.
Mast Boom Jib
A small arm attached to the boom allowing for extra reach while working.

For further details, please refer to the manufacturer's specification sheet.
Non-Marking Tyres
Non-Marking Tyres leave no black marks behind and are the perfect solution when working on sensitive flooring in environments such as showrooms and shopping centres.