JLG Toucan 1310

Specification

Make

JLG

Model

Toucan 1310

Working Height

13m / 42ft 8in

Platform Height

11m / 36ft 2in

Maximum Outreach

5.22m / 17ft 2in

Min Weight

5,600.00kg / 12,376lbs

Safe Working Load

200.00kg / 442lbs

Machine Length

4.07m / 13ft 5in

Machine Width

1.35m / 4ft 6in

Machine Height

2.19m / 7ft 3in

Power Options

Electric/Battery

Turning Radius

2.15m / 7ft 1in

Gradeability

20%

Interested in hiring a JLG Toucan 1310?

ENQUIRE

0800 865 4455

Download Specification

Overview Key Features Accessories Ideal Applications Resources

JLG Toucan 1310 Mast Boom

The JLG Toucan 1310 MEWP is the largest MEWP of this type with an impressive working height of 13m and an outreach of 5.22m. Its telescopic jib and powered rotating platform provide increased versatility for the operator. This machine is equipped with a full-traction battery pack which contribute to longer duty cycles whilst the proportional drive and variable speed controls assist in job site positioning.

Other benefits of this machine also include its lightweight and compact dimensions which make it ideal for internal and factory maintenance with hard to reach restricted areas. The JLG Toucan 1310 can be used for stock picking as well as general warehouse requirements.

Key Features of the JLG Toucan 1310

1.1m x 0.7m (W x L) steel platform
Slide bar rear entry
Full proportional drive joystick control with integral thumb steer switch
Variable speed dial control for lift/lower, slewing and jib (where applicable)
Selectable high / low drive speed
Telescopic and articulating jib
120 degree powered platform rotator 1
Function enable and malfunction warning lights
Load sensing system
Two Wheel Hydraulic Drive
Power plus drive 1
24V 930 A/hr full traction batteries
On-board 230V battery charger
Powered battery fill
Auto power save when idle
Low charge function cut-out
Selectable posi-trac
Automatic rear wheel brakes
Sculptured polyester hoods

Recommended training course for this platform: IPAF Category: Mobile Boom (3b)

Available to hire, lease or buy from Hire Safe Solutions in the UK & ROI.

Call us on 0800 865 4455 for more information

Or, fill out an enquiry form here and we will get back to you as soon as possible.

Looking for something else?

Discover our entire range of Mast Boom Lifts here.

The JLG Toucan 1310 can be fitted-out with an assortment of accessories to increase productivity and safety on site.

Boom Lift Pipe Racks
To help make transporting pipes and conduits easier for electricians, plumbers and maintenance workers, these boom pipe racks fit securely to the basket's handrails and have been designed to be as unobtrusive as possible, optimising the platform's work space.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Ground Guards
Our tough, durable ground guards offer a safe solution when working on soft or sensitive ground. They are strongly recommended when manoeuvring over grass to prevent the MEWP from sinking and becoming stuck.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Harness
Our safety harness and lanyards provide the operator with the necessary fall protection needed when operating any boom lift (Categories 1b and 3b). They are available to purchase and come with a handy carry bag to store your harness in.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@dev.hiresafesolutions.com
Telematics
Telematics can be added to your machine and act as an additional layer of security. Not only do they provide real-time monitoring, but they also help to prevent unauthorised use, limiting access to either IPAF-trained personnel only; or specific individuals with a unique pin code. Geo-Fencing can also be setup, further strengthening site security by ensuring the machine can only be operated in a pre-defined area.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Tool Tethers
When working with powered access, there is a risk of dropping tools out of the platform, which if working high enough, could prove fatal. Tool tethers offer a safe and effective way of preventing this and can be easily secured to a wristband, harness or fixed anchoring point on the platform.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com
Transformer & Lead
It's essential to fully charge all electric equipment each night in order to get the most out of them and prolong the lifespan of the batteries. Charging facilities on site can often be limited and 110V power may not even be an option. In these cases, our 110V transformers can be used to lower the 240V voltage coming from a standard UK plug socket down to the 110V that is required to safely charge the electric equipment. These can be supplied in 3.3kVA or 5kVA models depending on the type of machine being charged.

For more information or to add this accessory to your hire, get in contact with us today

Call: 0800 865 4455

Email: info@hiresafesolutions.com

The JLG Toucan 1310 comes equipped with various features designed to enhance your efficiency and performance on the job.

Electric Powered
This machine is completely electric-powered, perfect for working indoors and in sensitive environments.
Mast Boom Jib
A small arm attached to the boom allowing for extra reach while working.

For further details, please refer to the manufacturer's specification sheet.
Non-Marking Tyres
Non-Marking Tyres leave no black marks behind and are the perfect solution when working on sensitive flooring in environments such as showrooms and shopping centres.